Granulators/Granulating Machine

Laboratory Sieves

UF Super Fine Micro Pulverizer

Made up with a powerful main grinding machine, cyclone separator, an auxiliary electric control box, dust collector, and conveying pipe, the Unitfine Machinery’s Super Fine Micro Pulverizer can grind powders to fine particles without the need of mesh screens. The machine is suitable for continuous production as it is considered as an internally advanced level apparatus. This machine is widely used by different industry sectors. Mostly for pharmaceutical, food, animal feeds, chemical, and many others.

The UF Super Fine Micro Pulverizer varies by models where each one has a unique production capacity, size of input and output granules, running speed, weight, size dimensions, and total power feature. Depending on the pulverizing power you’ll need for production, you can select a unit that can produce 10 – 200 kilograms per hour to 200 – 3000 kilograms per hour. Output granules can go from 80 to 450 mesh, whereas input granules can take less than ten or up until 20mm.

Working Principle

Once the needed material flows through the funnel and spiral conveyor, it will then enter the grinding chamber where it will be broken down and pulverized by the sharp rotating blades.

When the material turns into a powder-like consistency, it will go through the guide ring and enter the classification wheel while it revolves. Air and centrifugal force caused by the engine will then start working on the powder.

The powder particles that don’t fit the critical diameter requirement will be sent back to the grinding chamber to go all over the pulverizing process again until it meets the critical diameter of the classification particles.

If and when powder particles are smaller than the critical diameter requirement, the negative pressure wind conveyance will bring the material through the cyclone separator to be put in a bag-type collector through a material exit pipe. The materials that were discharged are considered to be the final output that fits the critical diameter requirement.


  1. It can control the classifier’s speed and air and can evenly disperse the required granule specifications of the distributed materials without having to stop the machine.
  2. High-grade alloy steel is used to make the main grinding parts. This essentially lengthens the machine’s life cycle because it won’t wear off quickly even with extensive everyday use.
  3. The machine’s dust collecting bag can gather excess fine powder particles which can be recycled and reused for other manufacturing procedures.
  4. The machine has an internal classification mechanism that is used to save energy consumption through simultaneous categorization and grinding.
  5. Pipes and screws are easy to detach and construct back again, which makes the machine’s cleaning process quick and efficient.
  6. The machine is easy to clean and maintain since its top cover is opened with the pneumatic springs that make the body open on two sides.

Important Reminder:

The UF Super Fine Micro Pulverizer has six different model types, each with unique specs and output capacity. For more information on which Micro Pulverizer would work best for your business, please contact us, and one of our experts will guide you on the right path.

Technical Data

Model UWFJ-15 UWFJ-20 UWFJ-30 UWFJ-60 UWFJ-80 UWFJ-110
Prodtction Capacity
10~200 20~300 30-800 50-1200 100-1200 200-3000
Size of input granules(mm) <10 <12 ~10 ~10 ~15 ~20
Size of output granules(mesh) 80~320 80~320 60-450
Total Power(KW) 13.5 17.5 46 84.15 145 230
Main running speed ~6000 ~4800 3800 2800 2200 1480
Weight(kg) 850 1250 2800 4500 9500 16000
Overall Size(L×W×H) 4200×1200×2700 4700×1250×2900 6640×1300×3960 7500×2300×4530 9800×2600×6800 13000×3500×7200


UF Super Fine Micro Pulverizer


New Stuff